- Preparation of the Nano Cobalt Powder by Wet Chemical Reduction Method
-
Hyun-Seon Hong, Young-Dae Ko, Lee-Seung Kang, Geon-Hong Kim, Hang-Chul Jung
-
J Korean Powder Metall Inst. 2011;18(3):244-249.
-
DOI: https://doi.org/10.4150/KPMI.2011.18.3.244
-
-
26
View
-
1
Download
-
6
Citations
-
 Abstract
 PDF
- Spherical nanosized cobalt powder with an average size of 150-400 nm was successfully prepared at room temperature from cobalt sulfate heptahydrate (CoSO_4cdot7H_2O). Wet chemical reduction method was adopted to synthesize nano cobalt powder and hypophosphorous acid (H_3PO_2) was used as reduction agent. Both the HCP and the FCC Co phase were developed while CoSO_4cdot7H_2O concentration ranged from 0.7 M to 1.1 M. Secondary phase such as Co(OH)_2 and CO_3O_4 were also observed. Peaks for the crystalline Co phase having HCP and FCC structure crystallized as increasing the concentration of H_3PO_2, indicating that the amount of reduction agent was enough to reduce Co(OH)_2. Consequently, a homogeneous Co phase could be developed without second phase when the H_3PO_2/CoSO_4cdot7H_2O ratio exceeded 7.
-
Citations
Citations to this article as recorded by  - First-principles calculations to investigate electrochemical performance, storage mechanism and magnetocaloric effect of LiFeBO3 for lithium-ion batteries and magnetic refrigerants
Othmane Mennaoui, Rachid Masrour, Ling Xu, El Kebir Hlil
Ionics.2024;[Epub] CrossRef - Spark plasma sintering of WC–Co tool materials prepared with emphasis on WC core–Co shell structure development
Sungkyu Lee, Hyun Seon Hong, Hyo-Seob Kim, Soon-Jik Hong, Jin-Ho Yoon
International Journal of Refractory Metals and Hard Materials.2015; 53: 41. CrossRef - Coating of Cobalt Over Tungsten Carbide Powder by Wet Chemical Reduction Method
Hyun-Seon Hong, Jin-Ho Yoon
Journal of Korean Powder Metallurgy Institute.2014; 21(2): 93. CrossRef - Optimization of Wet Reduction Processing for Nanosized Cobalt Powder
Hyun-Seon Hong, Hang-Chul Jung, Geon-Hong Kim, Lee-Seung Kang, Han-Gil Suk
Journal of Korean Powder Metallurgy Institute.2013; 20(3): 191. CrossRef - Synthesis and Characterization of CoFe2O4/SiO2using Cobalt Precursors from Recycling Waste Cemented Carbide
Ri Yu, Jae-Hwan Pee, Yoo-Jin Kim
Journal of the Korean Ceramic Society.2011; 48(5): 454. CrossRef - Preparation of Spherical Cobalt Fine Powders by New Liquid Reduction Method
Dae Weon Kim, Ji-Hoon Kim, Yo-Han Choi, Hee Lack Choi, Jin-Ho Yoon
journal of Korean Powder Metallurgy Institute.1970; 22(4): 260. CrossRef
- Research and Development Status of Low-Cost Fe-based Cathode Materials for Lithium Secondary Batteries
-
Hyun-Seon Hong, Young-Dae Ko, Lee-Seung Kang, Hang-Chul Jung, Geon-Hong Kim
-
J Korean Powder Metall Inst. 2011;18(2):196-203.
-
DOI: https://doi.org/10.4150/KPMI.2011.18.2.196
-
-
20
View
-
0
Download
-
3
Citations
-
PDF
-
Citations
Citations to this article as recorded by -
Study of storage mechanism and the electrochemical performance of
LiMnBO
3
for lithium‐ion batteries
Othmane Mennaoui, Rachid Masrour, Abderrahim Jabar, El Kebir Hlil
International Journal of Energy Research.2022; 46(14): 19875. CrossRef - Solvent Extraction of Co, Ni and Mn from NCM Sulfate Leaching Solution of Li(NCM)O2 Secondary Battery Scraps
Hyun Seon Hong, Dae Weon Kim, Hee Lack Choi, Sung-Soo Ryu
Archives of Metallurgy and Materials.2017; 62(2): 1011. CrossRef - Synthesis and characterization of LiMnBO3 cathode material for lithium ion batteries
Kun-Jae Lee, Lee-Seung Kang, Sunghyun Uhm, Jae Sik Yoon, Dong-Wan Kim, Hyun Seon Hong
Current Applied Physics.2013; 13(7): 1440. CrossRef
|
kpmi
